Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

50Hz UPS- built-in body diode of FET for charging battery?

Status
Not open for further replies.
X

xyz9915

Member level 4
Member level 4
Joined
May 14, 2007
Messages
74
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Location
Pakistan
Activity points
1,817
50Hz UPS

Please view the attached schematic (for example only), which is a simple inverter circuit. I want to modify the circuit to make it Uninterruptible by adding relay for switching over from mains to battery & battery charging cut off function. My question is that can I use built-in body diode of FET for charging the battery?
 

Re: 50Hz UPS

xyz9915 ! I post this cicuit for masterleous

Yes you can use the internal diodes but you have to add a current limiting resistor

to limit inrush current becauce it will destroy MOSFETs when battery draw huge

current at start.
 
50Hz UPS

normal inverters use a taping at 140v or 180v and supply will give to the transformer by a choke or capactor to limit current and to boost voltage (charging volt)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top