Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me with making a multichannel board

Status
Not open for further replies.
L

lvesely

Newbie level 1
Newbie level 1
Joined
Nov 24, 2003
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
8
Multichannel board

Hi!
I need to help with multichannel board.
I have a schematic No.1 of one channel block (one operating amplifier).
I need to make board with connectors contacted to 4 same channels.
There will be 4 channels (4 operating amplifiers define by one channel schematic No.1), inpus/output conenctors and power suplly for all channels.
I don't want to make 4 copies of schematic No.1 to one big schematic.

How can I make it?

Thanks.
Libor
 

Re: Multichannel board

You can do this with a hierarchical design approach. Usually we do this if you have a large block which is repeated multiple times in a design. Check if the tool you are using supports this approach.
 

    V

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top