Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Pulse Source definition for S/H

Status
Not open for further replies.
M

Monady

Advanced Member level 4
Full Member level 1
Joined
Dec 1, 2008
Messages
109
Helped
12
Reputation
24
Reaction score
3
Trophy points
1,298
Activity points
2,151
Pulse Source

i have to use of Non overlapping clock for S/H.all pieces of this project is real thus i must define real pulse source that have rise and fall time.i don't know that how specify these times,can we define percentage of pulse width for rise/fall time?
(for example define rise time=0.1% Pulse width)
 

Pulse Source

Of course you can. Most of modern Spice simulators have parameters to use in the input programs. You can define parameter, for example: a period and then you may use it in the pulse definition.
 

    M

    Monady

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top