Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How can i get add at41411 spice model into ADS?

Status
Not open for further replies.
T

TerryADS

Full Member level 2
Full Member level 2
Joined
Oct 31, 2008
Messages
133
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Location
USA
Visit site
Activity points
2,066
Hi all,
Anyone share me at41411(Vce=8V,Ic=10mA) spice model?And How can i add it into ADS to do linear and nolinear analysis?
Thank you
 

Where can i get at41411 spice model?

i got it,it is PSP file.but i do not know how to open it,Anyone can tell me?
 

    T

    TerryADS

    Points: 2
    Helpful Answer Positive Rating
Re: Where can i get at41411 spice model?

*SPICE model for AT-41411

.SUBCKT AT41411 60 20 40
LL1 20 25 .05NH
* PI NETWORK TO SIMULATE TRANSMISSION LINE T1
C1T1 25 0 .11PF
LT1 25 30 .40NH
C2T1 30 0 .11PF
*
LLB 30 35 .5NH
CCEB 30 50 .04PF
LL2 40 45 .01NH
* PI NETWORK TO SIMULATE TRANSMISSION LINE T2
C1T2 45 0 .06PF
LT2 45 50 .10NH
C2T2 50 0 .06PF
*
LLE 50 55 .25NH
CCEC 50 70 .01PF
LL3 60 65 .05NH
* PI NETWORK TO SIMULATE TRANSMISSION LINE T3
C1T3 65 0 .13PF
LT3 65 70 .47NH
C2T3 70 0 .13PF
*
CCBC 30 70 .04PF
* CALL DIE MODEL
XDIE 70 35 55 AT414
.ENDS

* DIE MODEL (excludes bond wires)
.SUBCKT AT414 75 20 85
CCB 20 60 .032PF
DCD1 20 60 DMOD 572
RRB1 20 25 1.07 TC=0.8E-3
DCD2 25 60 DMOD 680
RRB2 25 30 3.2 TC=1.2E-3
DCD3 30 60 DMOD 340
RRB3 30 35 2.7 TC=1.8E-3
RRC 60 75 5 TC=0.6E-3
RRE 80 85 .24 TC=0.6E-3
CCE 60 85 .032PF
QINT 60 35 80 QDIS 420
.ENDS
*
.MODEL DMOD D(IS=1E-25, CJO=2.45E-16, VJ=.76, M=.53, BV=45, IBV=1E-9)
.MODEL QDIS NPN (BF=100, BR=2.5, IS=1.65E-18, VA=20, TF=12PS,
+ CJE=2.4E-15, VJE=1.01, MJE=0.6, PTF=25, XTB=1.818,
+ VTF=6, ITF=3E-4, IKF=1.3E-4, XTF=4, NF=1.03, ISE=5E-15,
+ NE=2.5)
 

    T

    TerryADS

    Points: 2
    Helpful Answer Positive Rating
Where can i get at41411 spice model?

Thank all.And how can i add it into ADS?And How to draw the corresponding schematics of the model?
 

Re: Where can i get at41411 spice model?

Dear VSWR,
Can you share me the schematics about it's spice model?
Another hand,whehther it can use for DC simulation?
Thanks
VSWR said:
*SPICE model for AT-41411

.SUBCKT AT41411 60 20 40
LL1 20 25 .05NH
* PI NETWORK TO SIMULATE TRANSMISSION LINE T1
C1T1 25 0 .11PF
LT1 25 30 .40NH
C2T1 30 0 .11PF
*
LLB 30 35 .5NH
CCEB 30 50 .04PF
LL2 40 45 .01NH
* PI NETWORK TO SIMULATE TRANSMISSION LINE T2
C1T2 45 0 .06PF
LT2 45 50 .10NH
C2T2 50 0 .06PF
*
LLE 50 55 .25NH
CCEC 50 70 .01PF
LL3 60 65 .05NH
* PI NETWORK TO SIMULATE TRANSMISSION LINE T3
C1T3 65 0 .13PF
LT3 65 70 .47NH
C2T3 70 0 .13PF
*
CCBC 30 70 .04PF
* CALL DIE MODEL
XDIE 70 35 55 AT414
.ENDS

* DIE MODEL (excludes bond wires)
.SUBCKT AT414 75 20 85
CCB 20 60 .032PF
DCD1 20 60 DMOD 572
RRB1 20 25 1.07 TC=0.8E-3
DCD2 25 60 DMOD 680
RRB2 25 30 3.2 TC=1.2E-3
DCD3 30 60 DMOD 340
RRB3 30 35 2.7 TC=1.8E-3
RRC 60 75 5 TC=0.6E-3
RRE 80 85 .24 TC=0.6E-3
CCE 60 85 .032PF
QINT 60 35 80 QDIS 420
.ENDS
*
.MODEL DMOD D(IS=1E-25, CJO=2.45E-16, VJ=.76, M=.53, BV=45, IBV=1E-9)
.MODEL QDIS NPN (BF=100, BR=2.5, IS=1.65E-18, VA=20, TF=12PS,
+ CJE=2.4E-15, VJE=1.01, MJE=0.6, PTF=25, XTB=1.818,
+ VTF=6, ITF=3E-4, IKF=1.3E-4, XTF=4, NF=1.03, ISE=5E-15,
+ NE=2.5)
Click to expand...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top