Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

DRILL DETAILS IN CADENCE ALLEGRO

Status
Not open for further replies.
S

san2004

Member level 1
Member level 1
Joined
Jun 26, 2007
Messages
40
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,286
Activity points
1,597
Hi Frnds,

I am new to Cadence Allegro tool. When I generate drill file it shows all other FAB information but drill chart & symbols are not seen. Is it related to DRC ? or any other settings ? All other layers are generated from MANUFACTURE --> ARTWORK function....

Kindly waiting for your replies...

Thanks in adavnce !!
 

Did you try Help in the Allegro? It is written step by step with flow chart.
Here is a snap shot from Allegro Help Documentation. It explains it all...

M
 

    S

    san2004

    Points: 2
    Helpful Answer Positive Rating
Thanks for your reply majnoon ....

I think problem was with updation of DRC....after doing it drl files got generated properly...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top