Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Process variations - BSIM parameter, FFF and FF corner

Status
Not open for further replies.
L

lipkai

Junior Member level 1
Junior Member level 1
Joined
Mar 3, 2008
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,390
Process variations

What BSIM parameter will change for different process corners (e.g. TT to FF)?
What's the difference between FFF and FF corner? Does the corner with 3rd "F" (poly critical dimension) is different from the FF corner?

Thanks!
 

Re: Process variations

Are you sure this is what we call process variation? Because, as far as I know, those are corner simulations and process variation is when you give your stuff to foundry and it comes back and it is not what you have designed
 

Re: Process variations

Refer them in model library, any parameters include variation value such as: FF,TT,FS..
 

    L

    lipkai

    Points: 2
    Helpful Answer Positive Rating
Re: Process variations

You can actually notice the difference by actually visiting the model files.
Example Difference between FFF ..... FF3F will be that in the former one PMOS is fast NMOS is fast and interconnect modeling is fast and in the next one includes all the cases 3sigma away from normal .....

SO summary is the format can be anything and can wary with different foundary models
 

    L

    lipkai

    Points: 2
    Helpful Answer Positive Rating
Process variations

tt, ff corner is global variation;
i think it is variation, too.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top