Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Benchtop power supply 0-30v 0-10a

Status
Not open for further replies.
G

gaga2410

Junior Member level 2
Junior Member level 2
Joined
Aug 4, 2007
Messages
24
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,439
Hello,

I've searched a design for a laboratory psu.

I've found this psu by Tony Van Roon : **broken link removed**

But it's rated for 115V. Is this suitable for 220V without major modifications ?

Thank you for your help and suggestions.
 

Hello,

Just change the transformer. Select a similar VA rating but a primary voltage of 220 V AC. (of course, you have to use the same secondary voltage as indicated on circuit).

Regards
 

    G

    gaga2410

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top