Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Hung Chang / Protek 3850 DSO

Status
Not open for further replies.

brmdjoko

Newbie level 3
Newbie level 3
Joined
Dec 14, 2005
Messages
3
Helped
4
Reputation
8
Reaction score
4
Trophy points
1,283
Location
Indonesia
Activity points
1,302
hung chang 3850

Hi, does anyone have Instruction Manual for Hung Chang / Protek 3850 DSO?
We've bought that DSO about ten years ago, but we've lost its manual.

Thank's
brmdjoko
 

protek 3850

Hi, i have the Instruction Manual for Hung Chang / Protek 3850 DSO.
I need the software for this model. Do you have the software?

Greetings,

Michael
 
protek 3850 dso

Yes, I`m interested. Are you still intersted in the manual? I will scan the manual and post it here in the forum.

Michael
 
hung chang digital storagescope 3850

I'm still interested and hope you could post me that document.
By the way, I attached the software that you interested in.
 
protek-3850

Hi, i have the Instruction Manual for Hung Chang / Protek 3850 DSO

Greetings,

Michael
 

    Unjoo Park

    Points: 2
    Helpful Answer Positive Rating

    Ivan49

    Points: 2
    Helpful Answer Positive Rating
    V

    Points: 2
    Helpful Answer Positive Rating
3850 protek

Hi ...
I recently bought this instrument also
but do not know how to use it with a PC
I do not have the cable connection or the data to make it
can any one help me?
 
hungchang support

no se si me puedan ayudar el archivo tipo rar de los controladores tiene un problema le falta el install.bat
 
Thank to everyone.

The manual are very good. The software are good but the install.bat are missing. Without this file the .exe file shows the error:
Runtime error 200 at 34DA:0091.

Thanks to everybody.

Added after 1 hours 23 minutes:

Dear readers,

I'm solved the runtime error. With PatchCRT.
http://pcmicro.com/elebbs/faq/rte200.html

I'm using a DOS 6.22 boot disk with Mouse Starter aplication and a patched HC3820.EXE all on my notebook started by floppy.

Thank again.
 
Thank to everyone.

The manual are very good. The software are good but the install.bat are missing. Without this file the .exe file shows the error:
Runtime error 200 at 34DA:0091.

Thanks to everybody.

Added after 1 hours 23 minutes:

Dear readers,

I'm solved the runtime error. With PatchCRT.
http://pcmicro.com/elebbs/faq/rte200.html

I'm using a DOS 6.22 boot disk with Mouse Starter aplication and a patched HC3820.EXE all on my notebook started by floppy.

Thank again.
Hi friend, I really need your help!
I have a Hung Chang 3850 dsc/ Protek 3850 but I don't have a manual or the software.
Can you upload it to me please?
Many thanks!
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top