Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Filter circuit for ASK Regenerative Receiver Module

Status
Not open for further replies.
L

leoren_tm

Advanced Member level 1
Advanced Member level 1
Joined
Dec 19, 2005
Messages
466
Helped
11
Reputation
22
Reaction score
7
Trophy points
1,298
Visit site
Activity points
4,305

ask modul

anyway..dont have a reply :( if i have an output of 9800 or 4600 baudrate, can you suggest a filter circuit? because its to noisy!!!
 

ask rf module software

could you share you experience on that module? any possible or suggestion for a design on the receiver part?(e.g antenna length, PCB routing)

Added after 7 minutes:

penoy_balut said:
that is naturally noisy because it operates on unlicensed frequency band which is similar to a crowded room, difficult to communicate, you have to add error detection routine to communicate successfully, i used similar module https://www.youtube.com/watch?v=yhoq1hGIG1Y
Click to expand...
i guess what you did is filtering the data by means of software..right?
 

ask module

PCB routing and antenna length are not critical in its operation, most processing of proper data acquisition is done by software
 

    L

    leoren_tm

    Points: 2
    Helpful Answer Positive Rating
a s k module

Thanks..thats all i need
another thing...do have some specs on it?
 

ask madule

very similar to that in your posted link only differ in brand
 

ask module ]

i just found that on net..but i dont have the datasheet...can you share what you have?
 

modul ask

ah tnx...been to that site....im trying to search some app-note. for a stable system
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top