Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

PIC+GPS+GSM - how to make serial interface

Status
Not open for further replies.
S

syide

Newbie level 6
Newbie level 6
Joined
Jun 11, 2008
Messages
11
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Visit site
Activity points
1,347
PIC+GPS+GSM

Hello,

I need to help me to know how I can Interface 2 serial device(GPS+ GSM) to PIC

and I need to what suitable PIC for this project.i plan to use 16F84A.If possible can someone show me how to do the circuit and coding

please help me.thak u
 

Re: PIC+GPS+GSM

PIC16F84 might be difficult to use for your application, it lacks USART although it can be done by software 1k ROM might not be enough , use the one with built in USART
 
Re: PIC+GPS+GSM

thanks for the reply.Do u hav any suggestion what pic most suitable to use?

Can u give me any tips,link,circuit that may be can help me to do this project.

ur help would be appreciate...
 

PIC+GPS+GSM

the popular PIC16F877A has built-in USART also some C compilers support multiple USART
 

Re: PIC+GPS+GSM

Can u guide me how to do it?

because i'm been searching on net about this project.Found same project that use 8051.But i not very familiar with it.
 

PIC+GPS+GSM

I'm not always logged on, just post your problems so others can also help
 

Re: PIC+GPS+GSM

Why i cannot open the file.I already try to open using express schematic.But it show error message.

This not valid ExpressSCH file
 

Re: PIC+GPS+GSM

Sorry Syide, i was late in replying to you,, as i had not logged here from quite some time as i was busy.
Again i am sorry for telling you to open it with Express sw. It is Portel Schematic software. As I quite regularly use express sch sw and portel sw. I misled you in this.
Again i am sorry for the inconvinience caused.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top