Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Horizontal and Vertical Routing

Status
Not open for further replies.
V

vlsitechnology

Full Member level 5
Full Member level 5
Joined
Nov 1, 2007
Messages
263
Helped
21
Reputation
42
Reaction score
14
Trophy points
1,298
Activity points
2,837
Why do we go for both horizontal and vertical routing ? why not only Horizontal ?? what kind of problem do we get if we go for only horizontal routing?

Reply me
 

If you use only horizontal routing. Your parasitics cap between wires of different metal layers increase. Also, while fabrication, a horizontal only routing could increase the probability of metals in adjacent layers getting shorted at some point.
 
vlsitechnology said:
Why do we go for both horizontal and vertical routing ? why not only Horizontal ?? what kind of problem do we get if we go for only horizontal routing?

Reply me
Click to expand...

It is not possible to connect two points by a horizontal line always.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top