Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help meeeeeeeeeeeeee plz

Status
Not open for further replies.
MrElec

MrElec

Advanced Member level 4
Full Member level 1
Joined
Oct 10, 2005
Messages
111
Helped
10
Reputation
20
Reaction score
9
Trophy points
1,298
Location
Tunisia
Activity points
2,074
Hi
I am trying to simulate the structure of the attached paper (Fig. 5). Neither S-parameters nor radiation pattern simulations are well.

Can somebody help me to simulate it with HFSS 11, please it's urgent.

Thanks
 

What is the difference? Are results just shifted or you have obtained totally different picture?
 

Hi,

The results for the S-parameters have just shifted and for the radiation pattern i've or obtained totally different picture.
What's the missing in my HFSS project.
I need you help friends.
 

Yes, I have reviewed the problem... I am not sure now about dielectric parameters... Probably they are mentioned wrong, when you change the parameters resonances will shift.
 

    MrElec

    MrElec

    Points: 2
    Helpful Answer Positive Rating
Hello e_m_c;

Thanks for the help, the dielectric parameters are correct ,i think that the problem is about dimensions of radiation box and substrate,type of exitation and polarization of the wave,these things are not mentioned in the article of course:D.
The great headach is the radiation pattern.I will post you my results.
 

Hi,
S11 v freq:



Problem1: S11 peaks at 3.11 GHz and 3.49 GHz are not approximatly at -9 dB???!!

Radiation Pattern at 3.97 GHz at XZ and YZ planes



Radiation Pattern at 3.49 GHz at XZ and YZ planes



Problem2: Radiation pattern at 3.97 GHz at XZ and YZ planes are good but for XY plane is not for monopolar antenna.

thanks for the help .
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top