Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Specctra autoroute single side whit autojumpers

Status
Not open for further replies.
MCMC

MCMC

Advanced Member level 4
Full Member level 1
Joined
Feb 2, 2002
Messages
101
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
699
specctra autoroute

Hi all :(

I need help !!!

How to set the rules (Layers) and do file to make single side pcb whit Horizontal & Vertical autojumpers in specctra ?

please helpme !!
 

specctra set jumpers

Hi,

To set only one layer its easy, but make autojumpers...I'm looking to, but think that is not possible

HH

NeuralC
 

software place jumpers autoroute

First open specctra design file and then:
1. Define top layer as jumper layer
---(layer TOP(type jumper)----
2. Define jumper length
---(jumper (length 400))--- Insert this row just before PADSTACK section

And you have autorouting with jumpers.
 
  • Like
Reactions: Artym

    A

    Artym

    Points: 2
    Helpful Answer Positive Rating
autoroute single side pcb

Hi borisov57,

>>Insert this row just before PADSTACK section

Can you be more clear?

HH

NeuralC
 

pcb autorout single side

Yes,

1.Open specctra design file in notepad
2. Press control+F( find ), type padstack
3.Insert "(jumper (length 400))" a row before padstack section begin.
That will told specctra, which jumper length to use.
I hope this helps. You can choose differnet jumper lengths and you can have more than one jumper defined.
 
  • Like
Reactions: Artym

    A

    Artym

    Points: 2
    Helpful Answer Positive Rating
specctra jumpers

i have seen spectra often hang out durring the routing can any one suggest the reason why
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top