Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Power supply noise reduction scheme??

Status
Not open for further replies.
J

jt_rf

Member level 2
Member level 2
Joined
Oct 19, 2006
Messages
43
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Visit site
Activity points
1,546
How to isolate on-chip sensitive circuits like BGR from switching circuits which switch at 100MHz but with package inductance create Very high frequency noise?


Can we use a onchip inductor to decouple the switching (noisy) circuit and the supply sensitive circuit?

any idea/document/links etc would be very useful.

advance thanks.

JT.
 

1.Star the power as close too the pad as possible.
1.1 Use a large (20u)substrate between the noisy/quite area and star it back to the pad.
2.Create as much space between noisy/quite circuits.
3. put minimum sized guard rings round all blocks.
 

    J

    jt_rf

    Points: 2
    Helpful Answer Positive Rating
Something more: use separated bonding/PAD for noisy circuit and quiescent circuit. And insert some GND PAD between them.
 

    J

    jt_rf

    Points: 2
    Helpful Answer Positive Rating
Thanks Leo & K_90 for your inputs.

I simulated using a separate PAD for switching and silent circuits. It works However, when connected at the top level, still there is noise coupling.

Should I use a altogether separate power supply pin for BGR?


again thanks for your inputs.

regards,
JT
 

They main point of staring back to the pad etc is to minimise the noise as much as possible, you'll never be able to eliminate it unless you use Deep Nwell to isolate it but that depends on the process you are using.
 

    J

    jt_rf

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top