Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Any good Suggestion would be most appreciated...!

Status
Not open for further replies.
S

santom

Full Member level 2
Full Member level 2
Joined
Sep 8, 2007
Messages
143
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
2,255
Hi all

I was trying to solve some of the old exam papers for my exam.I am not able to do the following problem.

Can anyone over here help me out in solving this problem with respective explanation.

(Also, please note that questions like this will be posted by me especially this week .So any good friends who are willing to help me out in solving are most welcome.I surely will be very grateful to you as this exam is the most important for me)


Thanks in Advance

Santom
 

For V1:
Both MOS are diode connected => both are at saturation:

I1=I2
µnCox(w/l)n(V1-Vtn)^2 = µpCox(w/l)p(Vdd-V1-Vtp)^2
Solving this equation: you can get V1.

For V2:
PMOS is diode connected => at saturation.
If Vtp >= Vtn: You should assume that NMOS is at triode.
I1=I2
µnCox(w/l)n(Vdd-Vtn-(V2^2)/2) = µpCox/2(w/l)p(Vdd-V1-Vtp)^2
Solving this equation: you can get V2.

If Vtp<Vtn:
you should check mode of operation of NMOS after previous solution (Vds>Vgs-Vtn)
If not at triode, solve as in saturation.
 

    S

    santom

    Points: 2
    Helpful Answer Positive Rating
Hi..Thank you very much for the reply.Let me try the way you told me.

If it works OK, I will get back to you to tell about its result.

Thanks once again.

Santom
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top