Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to measure psrr of LDO?

Status
Not open for further replies.
F

freeray

Newbie level 2
Newbie level 2
Joined
Sep 24, 2008
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,293
how to measure psrr

hi,all.
Can anybody suggest me how to measure psrr of LDO?
Could anybody suggest the ways and the required instruments I need to use? Thanks a lot.
 

ldo psrr simulation

hi
set the ac value of the supply to 1
run ac simulation
and show the output of the LDO
this link may be help you

regards
 

psrr ldo

The method described above is the easiest suggestion.
You could also do a xf analysis specifying the output node. You could get the PSRR, Ground rejection and output impedance of the LDO against frequency in one run.
 

ldo psrr

PSRR shows how the LDO output varies in accordance with power supply noise.

You will need either HSpice or Cadence to run your simulation.

For Cadence:
Place a vdc source at the power supply net. Set ac=1 for this along with its DC value.
Run AC analysis.
Use the direct plot drop down menu (Results) and click on AC dB20
Go to your schematic and click on the LDO output.
Hit Escape and u will be able to view the PSRR waveform.

For Spice:
At the power supply include ac=1
Run .ac simulation
Since PSRR = Vsupply/Vout in dB, Set a .print command as follows:
.print ac par '(20*log10((v(vsupply))/(v(vout))))'

Hope this helps!

Regards,
svraj
 
psrr simmulation in ldo

svraj said:
For Cadence:
Place a vdc source at the power supply net. Set ac=1 for this along with its DC value.
Run AC analysis.
Use the direct plot drop down menu (Results) and click on AC dB20
Go to your schematic and click on the LDO output.
Hit Escape and u will be able to view the PSRR waveform.
svraj
Click to expand...

that is the way to measure the PSRR of your LDO.
i have yet designed a LDO and i used this way to measure it.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top