Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to improve print precision in HSPICE

Status
Not open for further replies.
N

nooby

Newbie level 6
Newbie level 6
Joined
Aug 11, 2004
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
102
Hi all,

I am want to print some data when I run hspice, this is my head define:

.option post accurate=1 captab measdgt=8 igold=1
.print v(vout)

but the print precision can't change, it is :such as 0.7290, I hope the print number have good precision,such as can be 0.729125, that is to say,hope there have 6 or 8 number after the radiox point.

anyone can help me ?
Thanks,
Nooby
 

Dear nooby,

The most important control factors for numbering formats in the printout/measurement listing are as follows:

- The .OPTION INGOLD controls the format of numbers in printouts.
- The .OPTION NUMDGT=x controls the listing printout accuracy.
- The .OPTION MEASDGT=x controls the measure file printout accuracy.

In your case, you should change NUMDGT in .OPTIONS.

Regards,
EZT
 
Use

.options accurate=1 NUMDGT=8 DELMAX=1n method=gear INGOLD=2 POST=1
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top