Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

3-way uneven Wilkinson Power Divider

Status
Not open for further replies.
R

raed_microwave

Advanced Member level 4
Full Member level 1
Joined
Jul 26, 2008
Messages
107
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Location
Kassel, Germany, Germany
Activity points
2,066
three way wilkinson power divider

Hi guys,

I'm designing a 3-way wilkinson power divider and I need any ideas to design this circuit
thanxxxx for help
 

wilkinson power splitter

If its 3 way EVEN, you can try to read up microwave engineer by POAZR. There are some good reference in that book.
 
uneven wilkinson divider

You can use a "Kouzoujian Power Splitter."


Check out this link. Look for Jack's Power Spitter. You can use this topology, but modify it to get the "splits" you need.

**broken link removed**

Rod
 
3-way wilkinson power splitter

3-way Wlkinson combiner will be not so hard to design and build if you need smaller insertion loss. If loss is not the main concern resistive splitter can be used.
 

3-way planar wilkinson

yendori said:
You can use a "Kouzoujian Power Splitter."


Check out this link. Look for Jack's Power Spitter. You can use this topology, but modify it to get the "splits" you need.

**broken link removed**

Rod
Click to expand...

Thanks for this webside but I have to used only Wilkinson type bcz my topic in my Master thesis is 3-way uneven Wilkinson Power divider.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top