Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ADC Reference Voltage

Status
Not open for further replies.
I

itachi012587

Junior Member level 2
Junior Member level 2
Joined
Jun 9, 2008
Messages
24
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,441
adc reference voltage

Hello!

How to use reference voltage in Analog to Digital convertion in PIC16F877? And when I use 10 bit resolution what reference voltage do I need and if I use 8 bit resolution what also reference voltage do I need?

Thank you.
 

As I remember reference voltage is used to indicate the maximum voltage that will be used in conversion or your input voltage does not exceed this value. This voltage is required because it indicates your voltage resolution. Because PIC divides this voltage to resolution that is selected from user. So you must adjust this voltage value respect to your input voltage. Good luck
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top