Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to see variables in waveform (modelsim)

Status
Not open for further replies.
salma ali bakr

salma ali bakr

Advanced Member level 3
Advanced Member level 3
Joined
Jan 27, 2006
Messages
969
Helped
104
Reputation
206
Reaction score
21
Trophy points
1,298
Activity points
7,491
how to see waveform in modelsim

how can i see the variables of a design in the waveform window in modelsim??

thanks,
salma
 

modelsim view variable

Well what is the probelm there? You can browse to the 'process' of which you want to see variables, and them add them on to the waveform.
Well you can also use the add wave commmand as shown below
add wave {sim:/gut_top/bench/uut/wuut/\MainSM.bdcache_i.BufferDescCacheReg_reg_0__VALID_\Q}
Kr,
Avi
 
modelsim log process variables

ok thanks a lot...

so they're exactly like signals...but i had to choose add to wave not add all signals to wave (since they're not signals ;) )

another way also is to see them in the locals window :)

another question: if i want to simulate two designs together; a complete design along with one of its components..do i have to give only inputs to the complete design and it'll simulate the component anyway accordingly...or should i give also inputs to the component ??!!

thanks in advance,
salma
 

view variables in modelsim merged processes

yes you can. compile and simulate your top level design. in wave windows you can add signals of all or a particular component.
 

how to see wave form in model sim

well...i was asking because i had the processes of my design merged together for some reasons..!! and so i couldn't add the variables just by choosing the process and right clicking...etc etc..they weren't added...only the signals were :) but i tried it on another design with one process only and it worked fine...

thank you,
salma
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top