Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
--->First
this circuit I work very well :lol:
---> second
IF YOU want to test this circuit you must put the output in your hand then you will be sure this circuit is effective because you will be :sm11:
---> at last
the police man can't stopped yoooooooou :sm19:
I had an electronic kit as a child that made an almost identical circuit as a 'fun' electronic shocker. There's no way this circuit with a miniature audio transformer will do anything but irritate an attacker.
Real stun gun circuits use two transformers:- first a small oscillator-driven step up to charge a capacitor to about 200 to 400 volts; second a high-ratio coil (sometimes two coils) pulsed from the capacitor as it exceeds a predetermined charge (often simply by a spark-gap).
The second coil is the tough one to make, as it must be vacuum potted to withstand the high voltage in such a small size. Information Unlimited at https://www.amazing1.com/transformers.htm sell a just-about suitable second transformer, rated for 45kV.
More advanced stun guns use a timed firing of the output transformer to maximise the nerve disruption effect. Apparently, 28 to 32 Hz is the optimum for effect while not killing.
I found a couple more. The first is a basic circuit, the second is the innards of an even simpler, real (cheap!) stun gun so that you can see the sizes of the parts. Note the spark-gap contacts, like a big X.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.