Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What's the difference between the boresight gain and peak gain in HFSS?

Status
Not open for further replies.

nj1943

Newbie level 6
Newbie level 6
Joined
Nov 14, 2007
Messages
13
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,352
Hi all,
I have some simulated questions to ask. What's the different between the boresing gain and peak gain in HFSS, and how to configured ? Thx...
 

about antenna gain

I'm not sure about HFSS but,
Boresight means at azimuth = 0 degree. For some antennas, the maximum/peak gain need not be at the boresight, especially with arrays during scanning.
 
about antenna gain

Hi Kohi_boy,
thx for your answer, that's halpfully for me.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top