Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

which is the correct matching path in LNA?

Status
Not open for further replies.
J

John_li

Full Member level 5
Full Member level 5
Joined
Aug 6, 2005
Messages
272
Helped
9
Reputation
18
Reaction score
1
Trophy points
1,298
Visit site
Activity points
2,945
hi all,
I want to matching LNA for the noise,assume the Gamma(opt)=0.13/124.48,there is two matching path:from 50 Ohm to Zopt,or Zopt to 50 Ohm.In my mind,it is the different topology.and the last one is convenient and accurate to operate in smithchart.But more ducument select the first.Which one i should select?Why?
Thank you,
 

if ur matching from 50 ohm to Zopt , then the 50 ohm side will be the antenn and Zopt will face the device and so on

i think they both wil work , but it will depend on how u will implement it . the avalibale components , and so on

khouly
 

    J

    John_li

    Points: 2
    Helpful Answer Positive Rating
There is a good Amplifier Design Tutorial here which includes a noise matching procedure, I have used it several times:

**broken link removed**
 

    J

    John_li

    Points: 2
    Helpful Answer Positive Rating
When you are talking about Gamma,opt, that must be Gamma,s, which related to source impedance, so the correct way is to match from 50Ohm to Gamma,opt. However, you can to it in the other way, but you have to match from conj(Gamma,opt) to 50Ohm
 

    J

    John_li

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top