Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Connection problem between PIC16F877A and Sony Ericsson T230

Status
Not open for further replies.
E

elektrog

Newbie level 3
Newbie level 3
Joined
Apr 4, 2008
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,295
Hi everyone,

I have a project and I want to make communicate my cell phone and µc each other

for sending SMS. Is there any idea about this topic?

1. Can they communicate without signal converter? ( MAX232 etc. )



Thanks...
 

Re: Connection problem between PIC16F877A and Sony Ericsson

elektrog said:
Hi everyone,

I have a project and I want to make communicate my cell phone and µc each other

for sending SMS. Is there any idea about this topic?

1. Can they communicate without signal converter? ( MAX232 etc. )



Thanks...
Click to expand...

Greetings

It is possible. First, take this in mind: the PIC16F877A works with 5V, and the phone works at 3 or 3.3V; so, we need to convert 5V to 3 or 3.3V interface.

For that, just use a voltage divider with a couple of resistors you find easily at your residence zone, you could protect the 3 or 3.3V side with a 3.3 V Zener in addition to the voltage divider...

Good luck!
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top