Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[Eagle] How to have nets routed only on a specific layer?

Status
Not open for further replies.
E

Eugen_E

Full Member level 6
Full Member level 6
Joined
Nov 29, 2004
Messages
387
Helped
44
Reputation
86
Reaction score
11
Trophy points
1,298
Location
Romania
Activity points
2,878
Hello,

In Eagle 4.16, I need to route GND & VCC nets on the TOP layer (with GND pour) and the rest of the nets on BOTTOM. How can I specify this - GND, VCC to be routed only on TOP and the others only on BOTTOM (something like net layers in OrCAD)?

Thanks
 

in the command bar just type "auto <net1> <net2> ... <netn>"
then in the dialog box that opens select just one layer and then click ok.
repeat with the rest
:)
 

    E

    Eugen_E

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top