Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

antenna with a branch line coupler

Status
Not open for further replies.
S

sahar20

Member level 1
Member level 1
Joined
Apr 28, 2007
Messages
40
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,525
branchline coupler

I m modeling an antenna with a branch line coupler connected to it.Using Mgrid Layout. Feed is given to one port of the coupler. How I can give 50 Ohm termination to the other port of the coupler ?
 

You can define a port there. Then, you can terminate to 50-ohms or whatever termination you want on MODUA or MGRID in visualizating the current and doing the pattern calculation.
 

    S

    sahar20

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top