Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

co and cross polarization

Status
Not open for further replies.

sahar20

Member level 1
Member level 1
Joined
Apr 28, 2007
Messages
40
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,525
I have simulated a rectangular patch antenna, how could I see the co- and cross-polarization?
 

Hi

What program do you use?
 

    sahar20

    Points: 2
    Helpful Answer Positive Rating
if use from ie3d software:
Please enable pattern calculation on SIMUATION SETUP and perform pattern calculation on displaying current. Please use PATTERNVIEW to visualize the pattern data. Which one is co-pol and which one is cross-pol are defined by you. You decide which ones and you can visualize them on PATTERNVIEW.
 

    sahar20

    Points: 2
    Helpful Answer Positive Rating
i use from software HFSS V11
 

HFSS provides a wide selection relative to polarization (study online help for details). You might want to look at Stutzman's book on this subject for exhaustive details.
 

    sahar20

    Points: 2
    Helpful Answer Positive Rating
From what I know in HFSS, report type of rE.
rEL3X and rEL3Y are co- and cross polarization that you want to plot
 

    sahar20

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top