Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

which protocols shud an embedded system designer master???

Status
Not open for further replies.
T

tension885

Junior Member level 2
Junior Member level 2
Joined
Feb 16, 2008
Messages
21
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,447
hello forum :D

which protocols shud an embedded system designer master???

like i2c,spi,can...........

please mention the protocols you feel essential for embedded designer
 

Re: which protocols shud an embedded system designer master?

For control and management of the device from another machine, over a network such as a LAN or even internet, SNMP protocol is often used.It stands for simple network management protocol.
Although it is a very simple protocol, it is very powerful in terms of managing devices remotely from other machines.
This protocol is implemented in the application layer, which is the highest layer in the well-known OSI network model. It is usually implemented on a micro-controller on a device, which makes it embedded!
For more information you can go to www.google.com and search for snmp. You will get quite good info on the theory and the implementation.
 

Re: which protocols shud an embedded system designer master?

tension885 said:
hello forum :D

which protocols shud an embedded system designer master???

like i2c,spi,can...........

please mention the protocols you feel essential for embedded designer
Click to expand...

Well this depends on your field! Embedded systems per se is a broad field.
But the commonest communication protcols are those mentioned.
 
Re: which protocols shud an embedded system designer master?

You should learn them all.
When there is a need, you will be able to do the interfacing.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top