Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

SOLDERING IRON TEMPERATURE CONTROLLER

Status
Not open for further replies.
Z

ziaulislam

Member level 4
Member level 4
Joined
Dec 14, 2007
Messages
75
Helped
13
Reputation
26
Reaction score
11
Trophy points
1,288
Activity points
1,668
soldering iron temperature

I am in need of mains (220V.45W) SOLDERING IRON TEMPERATURE CONTROLLER

Circuit Diagram ( I will Prefer SG3524 PWM cont I.C based Design with out complex

Ferrite Transformers) Discations on this topic also welcome.

Thanks !
 

soldering iron temperature control

No REPLY sad :cry::cry::cry::cry:

Any thing gays.??????????????
 

soldering iron temperature controller

In my opinion using the soldering iron directly to a 220V it's complicate and dangerous, more common is a 24V unit. Some ideas here:
 
soldering iron temp controller schematic

Thanks! mister_rf

I think last one is good for me

after down loading Data sheets I can modifie

for 220V Iron.
 

temp controller soldering

mister_rf I can't find SP602 in Local market. will you

suggest any replacement ?

I shell be very thankfull

.
 

solder iron temperature

You need to use an OA with low voltage up to 6V, rail-to-rail,
Initially was used MCP602
**broken link removed**

try to replace with other circuits. Check if the pinout is compatible, (you need only one OA circuit from multiple) or adjust according datasheets

LMV321, LMV358,
**broken link removed**
LT1366
http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1155,C1001,C1158,P1489,D4286?
TS921
http://www.st.com/stonline/products/literature/ds/5560.pdf
LMC6442
**broken link removed**
MC33502
http://www.intusoft.com/onsemipdfs/mc33502.rev5.pdf
MC33202
http://www.intusoft.com/onsemipdfs/MC33201-D.pdf
 

soldering iron schematic

HI,
I was try this and i thing that is the best temp controller for 220V iron and for me.
 
replace lmv321

linoko ! Thanks for your reply

But 404 File Not Found: The File files-eboard/solder-reg_2_1030.rar does not

exist.

Pleas ! Reoupload
 

solder iron temperature control circuit lm358

mister_rf

I find LMV358 in the local market but it did not work properly. It also getting hot

after some time.

I use LM358 but change in the temperature range is to LOW.

Any other suggestion ?:|:|

Mr. linoko please upload gain.

ZIA
 

iron temp controller

Please check your schematics. MCP601/LMV358 power supply is limited to 5.6V by a zenner diode.
MCP601 maximum current drawn is less than 1mA. There’s a 6k8 resistor to connect the output to UAA2016 input.
By the way, how do you have adapted this schematics for 220/230Vac power supply?
 

lmc6442

mister_rf

It is simple I will use MOC30 SERIES OPTO COUPLER in the out put of

UAA2016 .
 

solder iron temperature control schematic

Mr linoko !
Please upload again Your schematic file!
 

uaa2016 schematic

ziaulislam said:
mister_rf
It is simple I will use MOC30 SERIES OPTO COUPLER in the out put of
UAA2016 .
Click to expand...
OK
So how it's connected the 220Vac power supply to the circuit?
 

solder temp controller

Hi Friends,
I'm reuploading the file now
Success for all
 
  • Like
Reactions: kkluci

    K

    kkluci

    Points: 2
    Helpful Answer Positive Rating
uaa2016

mister_rf I will connected the 220Vac power

supply to the circuit . As shown in the Attachment
 
soldering iron temperature controller schematic

mister_rf Hi !

I think you suggest GOOD circuit.

Thanks !
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top