Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Cannot create a simulation profile in Orcad 9.2

Status
Not open for further replies.
A

avi_e-

Member level 5
Member level 5
Joined
Feb 18, 2008
Messages
84
Helped
5
Reputation
10
Reaction score
0
Trophy points
1,286
Location
INDIA
Activity points
1,722
Hi Friend,


I made a circuit using OrCAD Lite 9.2. All things were going properly but I am getting problem while creating a simulation profile. Whenever Iclick the tab "Create a simulation profile". It is giving "Cannot create a simulation profile.


Regards,
Avinash.S.
 

Re: About Orcad 9.2

Normally after it says that, it also creates a error log and marks the components in error with a green circle...

In order to create a simulation profile all components should have a pspice model , u can verify that when u select a component from the library, it shows the pspice icon below the part symbol
 

    A

    avi_e-

    Points: 2
    Helpful Answer Positive Rating
About Orcad 9.2

There must be something rong with creation of your circuit. I have just tried to create simulation profile using OrCAD 9.1 (student version) with a part, taken from other library (i.e. without any Pspice model). The profile has been created. I think the simulation profile has nothing to do with part models.
Try to create the circuit with the default vales.
 

    A

    avi_e-

    Points: 2
    Helpful Answer Positive Rating
Re: About Orcad 9.2

Someone has the same problem. Uninstalling and reinstalling Orcad solved the problem. Maybe it works for you too.
 

    A

    avi_e-

    Points: 2
    Helpful Answer Positive Rating
Re: About Orcad 9.2

Hi
Dear
First You create the new project.
In that you select the A/D mixed design
The selcet all the component from PSsice.
then create the new simulation profile.
 

    A

    avi_e-

    Points: 2
    Helpful Answer Positive Rating
Re: About Orcad 9.2

Hi dmk,

I made a circiut for just analysing the dc quantities given in the book.
The circuit has its default values only.




Thank You all for answering.............


Regards,
Avinash.S.
 

Re: About Orcad 9.2

Hi Friends,

Thankyou everybody its working now. But there is another problem for me again, i.e., whatever the circuit you draw, while running it is showing errors and therefore the simulation is aborted. Its saying that Node N0083 is floating, Ground GND is floating. Please help I am fed up with this!!!!


Regards,
Avinash.S.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top