Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to draw helical wire in HFSS?

Status
Not open for further replies.
J

John_li

Full Member level 5
Full Member level 5
Joined
Aug 6, 2005
Messages
272
Helped
9
Reputation
18
Reaction score
1
Trophy points
1,298
Activity points
2,945
hfss wire

hi all,
Anyone can teach me draw helical wire in HFSS step by step?
Thanks,
John
 

helical wire

Hi

Draw a circle for example in (x,y,z)=(radius,0,0).

Right click choose view and select fit all.
Mark the circle and then select "draw helix" in the top bar menu. This will make a helix with a radius with a center i (x,y,z)=(0,0,0). If this is unappropriate you can define a new coordinate system.

You can choose between dx, dy and dz, this desides in which direction the helix will go.

Hope this helps
Regards
 
  • Like
Reactions: Hasan7

    J

    John_li

    Points: 2
    Helpful Answer Positive Rating
    H

    Hasan7

    Points: 2
    Helpful Answer Positive Rating
how to draw helix

I have done it.Thanks.Tyassin.
 

helical drow

Do you know what kind of pattern an helical antenna whose diameter is 10 cm has?

A cos pattern?

A delta pattern?

Thanks in advance. It's very important to me.

Lupin
 

drawing a helix in hfss

Helix antennas are discussed here regularly ....(use search)...

Kraus, "antennas" is a wealth of information on this (and other) antenna types
 

    J

    John_li

    Points: 2
    Helpful Answer Positive Rating
helix drawing hfss

Where can I find this book?

Lupin
 

drawing helix hfss

draw a line or a circle and then use the helix command and mention the different parameters.
 

wire model hfss

Kraus' book titled "Antennas for all applications" is a popular and wellknown reference for antenna designers. It should be easy for you to find it in bookstores. In fact, Kraus is the inventor of helix type antenna.
 
  • Like
Reactions: Hasan7

    H

    Hasan7

    Points: 2
    Helpful Answer Positive Rating
wire helix

I tried to do,what is needed for drawing a helix but HFSS gives an error such as : Body could not be created for part because of invalid parameters to cREATEhELİX operation.
I will be glad ,if you can say what can I do?
 

hfss wires

tyassin said:
Hi

Draw a circle for example in (x,y,z)=(radius,0,0).

Right click choose view and select fit all.
Mark the circle and then select "draw helix" in the top bar menu. This will make a helix with a radius with a center i (x,y,z)=(0,0,0). If this is unappropriate you can define a new coordinate system.

You can choose between dx, dy and dz, this desides in which direction the helix will go.

Hope this helps
Regards
Click to expand...

i try to follow your order.. but still i get this error..

Acis error: "Failed to sweep the object."
Body could not be created for part Circle1 because of invalid parameters of this part or some of its parent part/coordinate system
Acis error: "Failed to call api_sweep_with_options.. Acis Error 93009 - The helical sweep results in a self-intersecting body
Body could not be created for part because of invalid parameters to Helix operation.

i don't know but i read other tutorial, but find nothing...
 

I had the same problem...drawing my helix.......using the steps mentioned

Can any body help in this regard?

Thanking you in anticipation
 

Re: helical drow

Lupin said:
Do you know what kind of pattern an helical antenna whose diameter is 10 cm has?

A cos pattern?

A delta pattern?

Thanks in advance. It's very important to me.

Lupin
Click to expand...

Dear Lupin.

Helix is one of the easiest to construct and has wide bandwidth.coming to your question of what kind of pattern does a helix have. helix is modelled as a loop with 'N' number of elements in an array.
so that pattern of a helix is cos function.i have a Mathcad file to calculate the equations necessary to model a helix, and has the radiation pattern as well. let me know if you would like it.

hope that helps.

Best Regards
Rotmanlens.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top