Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to Calculate the PSRR of double Power supply LDO?

Status
Not open for further replies.
C

ckseu

Newbie level 4
Newbie level 4
Joined
Oct 25, 2005
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,310
Deal All:
Such as the Figure follow, we use a Vdd for Error Amp and other control block
And a Vin for N-type Power element
I know the PSRR of the Vout to Vdd,
But How about the PSRR of the Vout to Vin?
Thanks a lot and expect for any suggestion!
99_1205399116.jpg
 

The gain from Vin to Vout is very small when the NMOS operating in saturation region. It should be
Gain = Rseries/Rin@Vin = Rseries/(gm*ro*Rseries+ro+Rseries)
where, gm is transconductance of NMOS, Rin@Vin is the input impedcance looking into the NMOS from Vin, ro=1/λID is the output resistance of NMOS, and Rseries is the sum resistance of the two resistors.
But if the NMOS operating in linear region, the gain from Vin to Vout will rise.
According to this you can analyze the PSRR with the circuit parameters.
 

    C

    ckseu

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top