Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to find co/cross polarization at hfss

Status
Not open for further replies.
A

ayem9

Newbie level 4
Newbie level 4
Joined
Aug 17, 2007
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,327
gainl3y hfss

hi
I am able to find the result for far field pattern.
but i am unable to see the result for copolarization and cross polarization at hfss v10.

HFSS>> Result>> Creat Report > ??
can anyone help me to know the steps

i badly need to know this. thanx
 

cross polarization hfss output variables

same quastion please if any one can help us
 
The post processor has about a dozen choices for different polarizations. You need to decide what you want by co and cross polarization then select the appropriate output.

This reference will provide more than you could ever want to know about polarization:

Warren L. Stutzman, Polarization in Electromagnetic Systems, Artech House, Inc., 1993.


There is additional help in the on-line documentation or in the IEEE, particularly in MTT or TAP
 

Hi, i am not so sure that my way is correct, my senior taught me the way.

HFSS>Results>Create Report>Far Field,Rectangular Plot....Solution (Setup1:Sweep1), Y(Gain,click GainL3X>dB and click GainL3Y>dB)...Under Sweeps, please choose the frequency you want under FREQ

Hope it can help. If i am wrong, please show me right way too. Thanks
 
  • Like
Reactions: zirif

    Z

    zirif

    Points: 2
    Helpful Answer Positive Rating
thanks for u all i will try it
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top