Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to check if DTMF IC is working properly?

Status
Not open for further replies.
joe1986

joe1986

Full Member level 4
Full Member level 4
Joined
Jan 25, 2008
Messages
204
Helped
24
Reputation
48
Reaction score
11
Trophy points
1,298
Activity points
2,922
how can i check if my DTMF IC is working properly or not...........any idea????
 

Re: DTMF CHECK

joe1986 said:
how can i check if my DTMF IC is working properly or not...........any idea????
Click to expand...

You need to feed it two sinewave frequencies, one from the lower group and one from the upper group of 4 frequencies simultaneously and verify the correct 4-bit result at the digital decoded output of the chip. Depending on the chip type, you may need to take the 2 dB +/- 1 dB signal level difference into account.

Good luck !

Hans
 
Re: DTMF CHECK

hi nandhu015 .................do u have any diagram which shows how to connect it to the telephone???
 
DTMF CHECK

Which DTMF IC do you use?

You can connect it with a MT8888 to check if it transmit/receive right or wrong.
 

Re: DTMF CHECK

THANK a lot doctor laktronics........................DO U HAVE THE MAY 07 edition of EFY..........there's a file called "WIRELESS TEXT MESSAGING OVER MOBILE/LANDLINE...........????
 

DTMF CHECK

use oscope to view the dtmf signal ..
 

Re: DTMF CHECK

Hi,
I just remebered, your 5V supply should not have a safety earth connection, since telephone line is already earthed through +ve of the battery. I don't have the May Issue, you may get it from their site?
Regards,
Laktronics
 

Re: DTMF CHECK

hi .....doctor laktronics there is one problem ...........the site is asking for username and password of subscribers..............actually i subscribe for ELEKTOR ELECTRONICS...........and not EFY ...................are you a subscriber???
 

Re: DTMF CHECK

joe1986 said:
the IC IS DTMF 8870..................ITS ACTING AS A DECODER
Click to expand...
Have you made a test board?
If you have, it's so easy.

Connect your phone line to the input of 8870. Call from other phone. Hook up the phone which connect with 8870. Then press some numbers from the caller phone. If your test board can receive what you press , it's working well. That's all.

Regards.
 

Re: DTMF CHECK

whts a TEST BOARD AND HOW TO MAKE IT???
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top