Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

My Diva run do not extract parasitics.How can I fix it?

Status
Not open for further replies.
J

Johnson

Advanced Member level 2
Advanced Member level 2
Joined
Oct 4, 2004
Messages
520
Helped
28
Reputation
56
Reaction score
7
Trophy points
1,298
Activity points
3,613
assura settempdir

Is Diva able to extract parasitic information for post layout simulation?
Is Diva-RCX another product or it is a feature in Diva?
My Diva run do not extract parasitics even drain/source capacitances! How can I fix it?
 

Re: DIVA

DIVA RCX (R-C-eXtraction) is a module of DIVA that is, depending on the setup provided, able to extract parasitic R's and C's. Check which switches are availabe when you open the RCX menu.

Regards,

Chris
 

    J

    Johnson

    Points: 2
    Helpful Answer Positive Rating
DIVA

How I can set it up to do the RC extraction?
 

Re: DIVA

You need to write a rule file that includes all the parasitics information required. I'm not an expert when it comes to writing these rule files, but you should be able to find or request documentation from Cadence.
 

    J

    Johnson

    Points: 2
    Helpful Answer Positive Rating
Re: DIVA

Johnson said:
How I can set it up to do the RC extraction?
Click to expand...

are you using a pdk ?
if u are using a pdk, there should be divaDRC.rul , divaLVS.rul and divaEXT.rul in the pdk. you can use these files for your extraction, just like the assura.
 

    J

    Johnson

    Points: 2
    Helpful Answer Positive Rating
DIVA

Yes I am using 90nm GPDK, and those files exists. Whan I do the extraction, it does not contain parasitics. Even worse it give very simple output for mosfets!! Also Assura gives error in RCX! it has problem with "setTempDir".

Is Diva outputs valid for 90nm? Or I have to switch to Assura?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top