Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to place a ground plane with the auto router facility of Proteus ?

Status
Not open for further replies.
T

tijoseymathew

Member level 4
Member level 4
Joined
May 13, 2007
Messages
77
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,288
Activity points
1,755
Hi

how can i place a ground plane by the auto router facility of proteus ? i.e. like the plane is connected to the Gnd of the circuit. I ususally go for a single sided PCB.

Secondly what is the diff. b/w autorouter and electra in proteus ??

Thirdly Autorouter gets stuck and I cannot stop it. Since I am not the administrator of windows I cannot use Ctrl+alt+del so how else can i stop the autorouter ?

Thanks
 

proteus gnd

how can i place a ground plane by the auto router facility of proteus ? i.e. like the plane is connected to the Gnd of the circuit. I ususally go for a single sided PCB.
Click to expand...

Planes are placed using the plane tool (icon) and assigned to a net on placement.


Secondly what is the diff. b/w autorouter and electra in proteus ??
Click to expand...

ELECTRA is a shape based router and therefore performs better with fine pitch SMT and/or densely packed boards.

Thirdly Autorouter gets stuck and I cannot stop it. Since I am not the administrator of windows I cannot use Ctrl+alt+del so how else can i stop the autorouter ?
Click to expand...

Press the ESCAPE key.

Iain.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top