Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Why ppl use ow thickness boards,eg. 1mm instead of 1.6mm?

Status
Not open for further replies.
F

FatPanda

Newbie level 2
Newbie level 2
Joined
Jan 4, 2008
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,292
4Layer PCB

Why some PCB designer prefer to use low thickness board, for example 1mm instead of 1.6 mm? an example for this issue is HDD board!
 

4Layer PCB

I suggest that it is the impedance matching problem, but 1mm bards has less reliability
 

    F

    FatPanda

    Points: 2
    Helpful Answer Positive Rating
4Layer PCB

What about mother board, how many layer is common for them?
 

4Layer PCB

for home user the main concern is price so they are mostly 4-layer board but for industrial applications they may use 8 or 10-layer PCBs.
 

    F

    FatPanda

    Points: 2
    Helpful Answer Positive Rating
4Layer PCB

for consumer boards, you have to minimise the layer count, so that you can get the cheaper boards. For mother boards, anywhere from 8 layers to 16 layers or so..
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top