Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

TCP/UDP communication between a microcontroller and a PC

Status
Not open for further replies.
D

drabos

Full Member level 6
Full Member level 6
Joined
Jan 3, 2006
Messages
397
Helped
45
Reputation
90
Reaction score
15
Trophy points
1,298
Activity points
3,769
I would need a TCP or UDP communication between a microcontroller and a PC. The required speed: 1-2 Mb/s.
Can you recommend me something?
Does anybody have experience with WIZnet stuffs?

Thanks
 

mikroe wiznet

Hi,

CP22xx from silicon labs is pretty simple to use. Silicon labs provides lots of code examples for sending data Via ethernet. Vist www.silabs.com for more details


With regards
S.Rajesh Kumar
 

    D

    drabos

    Points: 2
    Helpful Answer Positive Rating
Re: ETHERNET controller

Hi,

You can use Cirrus Logic's CS8900. It has inbult MAC & PHY with ISA interface. The controller will support 10mbps.
 

    D

    drabos

    Points: 2
    Helpful Answer Positive Rating
Re: ETHERNET controller

drabos said:
I would need a TCP or UDP communication between a microcontroller and a PC. The required speed: 1-2 Mb/s.
Can you recommend me something?
Does anybody have experience with WIZnet stuffs?

Thanks
Click to expand...


Try search Zilog or Microchip MCU. They have intergrated ethernet controller with MCU. THis is the most simple way to do your project.

If you like other method. --> www.edtp.com
 

ETHERNET controller

ENC28J60 Stand-Alone Ethernet Controller with SPI Interface from Microchip is also good choice
 
ETHERNET controller

How about wireless ethernet chips?
 

Re: ETHERNET controller

UBICOM

**broken link removed**
 

ETHERNET controller

in some project microcontrller with integrated ethernet controller is best choice, example for this type of controller are PIC18F97J60/J90
 
Re: ETHERNET controller

Hello, I think wiznet is a good choice if you need a LAN 10/100 fast.
I used it about 4 years ago.
I tryed to analyze other market solution but wiznet was faster.
Anyway if you don't need performance you can use other solution (a processor with integrated LAN, for example NXP LPC2378).
Regards

Dan
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top