Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

List of Microcontroller which i can fuse using PC??

Status
Not open for further replies.
A

agk.ganesh

Newbie level 5
Newbie level 5
Joined
Dec 17, 2007
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,333
Hi all :):)

I have little experience in working with AT89S8252 MUC for my mini Project... I fused my program into it using a very simple circuit and PC.

I need the list of Microcontrollers which r easy to fuse programs like the above 1.. with added functionality ...

I could not spend on Development Board :(

Thanks...

Waiting for replies... :)
 

Are you restricted to Atmel's microcontrollers? If not, there are a lot of microcontrollers that can be programmed by simple hardwares, and appropriate softwares. For example, I can program most of my PICs (Microchip's microcontrollers) with a JDM-compatible programmer, and softwares like WinPIC (from DL4YHF), WinPic800, or PICPgm (I've got about 80 different PICs).

Cheers,
 

    A

    agk.ganesh

    Points: 2
    Helpful Answer Positive Rating
namqn said:
Are you restricted to Atmel's microcontrollers? If not, there are a lot of microcontrollers that can be programmed by simple hardwares, and appropriate softwares. For example, I can program most of my PICs (Microchip's microcontrollers) with a JDM-compatible programmer, and softwares like WinPIC (from DL4YHF), WinPic800, or PICPgm (I've got about 80 different PICs).

Cheers,
Click to expand...

Not restricted to Atmel... But i have experience of working in that... :)

My project is abt transmitting the temprature sensed to PC through Bluetooth...

So wat wuld u recommend me to use for my project....

Thankss
Waiting for replies...
 

blue tooth txd and rxd means more manipulation , so need mid/higher end mc
 

Still waiting for reply.... frnds!!

So can u tell the Mid end mc's which i can fuse program easily using my PC?

Thanskssss
 

Now days each and every microcontroller uses isp.
So you can programmer any mc atmel, pic renesas etc. with simple isp adoptor

select your micro according to your need and your interest.

Regards
Nandhu
 

    A

    agk.ganesh

    Points: 2
    Helpful Answer Positive Rating
Can any1 give me a list of few mc which will suit me for my project better...
 

Waiting for reply.....

help me plssssss
 

There is a variety of µC. PICs (16f, 18f ..), AVR.,....
Chosing the appropriate one depend on your application.
Can you give as details about ?
 

Shall i know what your problem actually is?

Almost all microcontrollers in the world should be connected to the pc for programming, thro rs232, parallel port or usb.

unless you make clear what problem does you face, there will be no conclusion.

Make it clear.

Regards
Nandhu
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top