Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Boost+H-bridge problem

Status
Not open for further replies.
X

xlxlyu

Junior Member level 2
Junior Member level 2
Joined
Mar 23, 2007
Messages
21
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,283
Activity points
1,380
dc to ac h bridge

i want get a 100V/1khz sin AC through 5V DC,
the first circuit is boost ,change 5V DC to 50V DC,
then H-bridge circuit change DC to AC,in SPWM control,

the simulation of single circuit is ok,but when i put those circuit simulate together,
the output wave is wrong , i don't know why ,needs help ,tks!!!


 

h-bridge booster

You need to have feedback here. Without the feedback the circuit won't be able to track the output and compensate for it.
 

    X

    xlxlyu

    Points: 2
    Helpful Answer Positive Rating
h-bridge boost

but how to add feedback,can u explain it
 

Do you have IEEE account? If yes you can try downloading this paper:
ieeexplore.ieee.org/iel4/7/8964/00395244.pdf
ieeexplore.ieee.org/iel5/10622/33557/01594121.pdf

You can also read this paper:
http://www.atmel.com/dyn/resources/prod_documents/doc4865.pdf

Added after 2 minutes:

Usually we can apply feedback from the output of the H-Bridge or from the load. Applying feedback directly from the output of the H-Bridge requires some filtering while applying feedback from the load can track the output signals without extra filtering but there are phase shift caused by the filter connecting the H-Bridge to the load.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top