Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

altium designer, How to filter unconnected tracks in a pcb?

Status
Not open for further replies.
F

fala

Full Member level 5
Full Member level 5
Joined
Sep 18, 2005
Messages
249
Helped
19
Reputation
38
Reaction score
4
Trophy points
1,298
Activity points
3,569
Hello board, I'm looking for a phrase that can select those connections(sequence of connected tracks) that are not connected to pads at both ends. I don't want connections that are connected to pads at only one end to be included . can someone help?
thanks,
 

Re: altium designer, How to filter unconnected tracks in a p

As far as I know, there's no query that will do what you are asking. There is an unrouted net design rule that will flag incomplete routing, but it can't be limited to connected only at both ends - it will show any net that is not completely routed.

You can run the just the single "Unrouted Net" DRC from 'Tools>Design Rule Check>Rules to Check>Electrical'. Just uncheck the other rules by right clicking in the "Batch" column, select "All Off", then check just the Un-Routed Net, and run a batch check.
 
  • Like
Reactions: fakoorelec

    F

    fala

    Points: 2
    Helpful Answer Positive Rating
    F

    fakoorelec

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top