ScrewDriver
Newbie level 4
hello
How long it will take for one byte ( 1 start bit, No parity,1 stop bit) in 9600 baud?
As far as I understand it is (from some searches in google)
9600/(8+1+1) = 960 bytes/ second
So one byte will take 1000/960 ~ 1 millisecond.
So if interrupt enabled for serial port in a MCU and data is coming in 9600 baud ,serial interrupt will appear in 1 millisecond gap.
is this correct?
Thanks
SD
How long it will take for one byte ( 1 start bit, No parity,1 stop bit) in 9600 baud?
As far as I understand it is (from some searches in google)
9600/(8+1+1) = 960 bytes/ second
So one byte will take 1000/960 ~ 1 millisecond.
So if interrupt enabled for serial port in a MCU and data is coming in 9600 baud ,serial interrupt will appear in 1 millisecond gap.
is this correct?
Thanks
SD