Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Ideas for fast laser communication network

Status
Not open for further replies.
W

waqaryounas

Newbie level 6
Newbie level 6
Joined
Dec 5, 2005
Messages
13
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Visit site
Activity points
1,365
Hi,

My project is laser communication network. n I m getting data frm pc through serial port. But the prob is, UART (max232) restricts the data to much lower speed than 120kps which is serialports max speed.... also I wana knw the fast switching transistors for laser switching....can someone recomend any alternative to my approach for fast speed...can I use frequency modulation ......
 

Laser communication

How many MBPS or GBPS are you talking about? Of course you cannot use directly from optical comm to RS232. U can use freq modulator, but best thing is that you use an appropriate ASIC for optical comm.
 
  • Like
Reactions: peony

    P

    peony

    Points: 2
    Helpful Answer Positive Rating
Re: Laser communication

wud u plz elaborate how frequency modulator can b used. anything above 1mb-50mb wud b sufficient.....Actually my task is to transfer files with different extensions and audio files....
 

Re: Laser communication

It is such a loss to use optical system to transmit 50Mbps. to go higher use the 1Gbps ethernet adaptor, then convert its siganl to an optical signal usuing any laser driver, you would find plenty on maxim-ic.com. or you could use a programmable PCI card. but i prefare the ethernet adaptor. you also would need a high speed RX, and a limetter. good luck
 
  • Like
Reactions: peony

    P

    peony

    Points: 2
    Helpful Answer Positive Rating
Laser communication

RS232 is slow. Why you don't use usb 2 for your optical communication.
 
  • Like
Reactions: peony

    P

    peony

    Points: 2
    Helpful Answer Positive Rating
Re: Laser communication

what wud I need to use USB 2.0...I mean which IC and driver for usb...can u provide som information
 
  • Like
Reactions: peony

    P

    peony

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top