Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to make 2xMUX 1-of-8 to 1-of-16?

Status
Not open for further replies.
jhanus

jhanus

Member level 2
Member level 2
Joined
Feb 27, 2007
Messages
48
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Location
Croatia
Activity points
1,690
Hello,


I have a problem, I need MUX that has 16inputs and 1output. In my local shop there is only 1of8 MUX, so how to make from two 1of8 one 1of16 MUX.

If it's not a problem, maybe I will need expend outputs also, so example of demux with 1input and 8outputs converted to demux with 1input to 16outputs would be super.

Thank you.


EDIT:

I corrected my mistake, it's 1of8 MUX, not 1of4 like I wrote it before.
 

What kind of mux you need?
Analog or digital?
What kind of chip does your local shop have?
 

Hi,
do you have an enable pins on our mux?
 

See schematic.

I have skipped the inputs in the drawing.

51_1195398338.jpg


A0--A3 are the address selectors.
 

    jhanus

    jhanus

    Points: 2
    Helpful Answer Positive Rating
Thank you for helping.

At the moment I have only one ls151 so I can't try it.
I understand how this circuit works I just don't understand why didn't I get that idea (for example to look at the logic diagram of the MUX in the datasheet). :|


Thanks again.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top