Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to design big uwb patch bowtie antenna

Status
Not open for further replies.
J

janlcc

Newbie level 5
Newbie level 5
Joined
Mar 15, 2007
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,333
uwb bowtie

Hi,

I am trying to simulate a wide band patch bowtie antenna using HFSS. From the literatures, I found the UWB bowtie antenna falls into two categories, slot bowtie antenna with CPW feeding and self-complementary bowtie design. I want to design a patch bowtie antenna with both ties in the same side and as big as possible in comparing with the wavelength. Is it possible?

Can some give a hint how to design a bowtie antenna, such as the roles in the bandwidth, gain of the flare-angle and the dimension of the antenna?

Thank you very much!

jennifer
 

this may be helpful
 
  • Like
Reactions: hssss

    H

    hssss

    Points: 2
    Helpful Answer Positive Rating
Thanks,

I download this paper from the forum before. However, I think the structure is a self-complementary bowtie. The ties are in two sides. I am looking for a UWB bowtie with two ties in the same side of the board.
It helps, though.
Thank you again.

Jennifer
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top