Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to get operating information of a MOS in ADS

Status
Not open for further replies.
J

Julian18

Full Member level 3
Full Member level 3
Joined
Apr 9, 2007
Messages
167
Helped
5
Reputation
10
Reaction score
5
Trophy points
1,298
Activity points
2,389
Hi, there
I want to know how to get Cgs, gds or gmoverid etc. of MOSFET when simulating using ADS?



Thanks
 

Run DC analysis, then hit Print -> DC Operating Point and then click on the transistor you want.
 

    J

    Julian18

    Points: 2
    Helpful Answer Positive Rating
from simulation menu , select anotate DC solution

or show device operating point

khouly
 

    J

    Julian18

    Points: 2
    Helpful Answer Positive Rating
Hi, all
thank you all, but what i want is run a DC sweep and then find these Operating parameters (gm, Cgs, etc) as a function of the sweeping variable and plot them.


B.R.

Added after 51 minutes:

in fact what i like to know is whether i can access my simulation data thru some functions in ADS like I do in spectre by "getData" etc.
 

in DC or any simulation enginer , in paramters tab , check device operating point select berif , or detailed

khouly
 

    J

    Julian18

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top