Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

about mix-signal simulation

Status
Not open for further replies.
spring1860

spring1860

Member level 5
Member level 5
Joined
Nov 2, 2007
Messages
93
Helped
5
Reputation
10
Reaction score
2
Trophy points
1,288
Activity points
1,745
hi
can someone tell me wich software is more useful for the simulatin of mix-signal circuits ?

THX.
 

I've used Orcad PSIPCE with schematic capture for that recently. I was far from convinced by it as a useful tool (I was only using flip-flops and some logic gates along with a whole bunch of analogue stuff), I'm not sure how it is for handling HDL type stuff.. A few years ago I used AdvanceMS by Mentor Graphics, with I think, the ELDO simulator (it's about 5 years ago), and you could simulate VHDL and link it with spice. It was reasonably accurate as it used the normal HDL simulation software along with PSPICE.

I think it depends on the complexity of your system, and whether it is a big analogue system with some digital controlling stuff or vice-versa.

Hopefully somebody knows more about this area than me.
 

yeah mentor ADMS is great , also cadence AMS designer is veru good as well

khouly
 

    spring1860

    spring1860

    Points: 2
    Helpful Answer Positive Rating
thank all U very much
its really helpful to me
 

use system vision from mentor graphics.
 

Does anyone know any tool which is free and that allows you to simulate decent size designs. I tried smash, but its limitations are a joke. It's pretty much just a DAC or ADC and that's it. Anything extra exceeds the limitations.

If anyone can help with a link for a free tool for AMS + HDL simulation, Id really appreciate.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top