Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Bipolor input for OPAMP

Status
Not open for further replies.

hamdan

Newbie level 3
Newbie level 3
Joined
Nov 7, 2007
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,307
Hi All,

I am using bipolor +/-5V using OPA2350.
If I use the OPA2350, the Bipolar input is +/-5V, Will it work?
(The VDD for the OPA2350 is 5V only). Rail to Rail input means what? ( Is it the Bipolar input is +/-5V?)

Regards,
Hamdan
 

Not all your questions are clear for me:
- do you use a bipolar powersupply or only +5V?
- if your input voltage is equal to the powersupply you can't amplify.
-
One question I can answer:
Rail-to-rail means that the output can swing equal to VEE and VCC. Some opamps can only swing near VEE and VCC.
 

    hamdan

    Points: 2
    Helpful Answer Positive Rating
Hi,

Thanks for your answer for the Rail-to-rail. For the other question, I found answer from the datasheets.

Regards,
Hamdan
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top