Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

how to do a scan chain in Astro?

Status
Not open for further replies.

Wang Chin

Newbie level 6
Newbie level 6
Joined
Jul 1, 2003
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
92
Hi, All,

The document for scan chain in Astro seems very poor. Does somebody can tell me where to get related information for the flow or maybe you have a command file to porvide me to this issue!
Thanks!
 

Scan Chain

Scan Chain insertion is done in DFT compiler before Astro routing
 

Hi, cathay,

I see. I mean, if my netlist have a scan cell, how to do it in Astro?
In Astro's document, we can just find a few papaer in appendix B for this issue. But, after seeing the paper, I don't know how to do it. So, if you can help me, I will appreciate your help.
 

Wang Chin said:
Hi, All,

The document for scan chain in Astro seems very poor. Does somebody can tell me where to get related information for the flow or maybe you have a command file to porvide me to this issue!
Thanks!
hello,can you tell me your Astro is for linux or for workstation
what's it's version?
thank you !
 

scan chain is already done in DFTC and generate a scan netlist for Astro,
In Astro just take care the scan clock path only.
 

My Astro is Unix and 2003.03!
 

johnnyh said:
scan chain is already done in DFTC and generate a scan netlist for Astro,
In Astro just take care the scan clock path only.

Sir,

I see! The scan chain have done in DFTC. I think my question is how to take care the scan clock and path in Astro? Thanks!
 

hi,

Astro only perform reordering scan cell in scan chain flow
You can delete scan chain before placement and connect afer CTS.
Do you want to detail about how to run this flow ?

chyau
 
hi,

What you can do is, you let Astro know the scan chain path befoer the placement, and, astro will make note of it.

After CTS, you can ask Astro to reconnect them back and do a scan chain reordering.
 

hi,

Astro only perform reordering scan cell in scan chain flow
You can delete scan chain before placement and connect afer CTS.
Do you want to detail about how to run this flow ?

chyau


Hi chyau

Please let us know the detail reordering flow if you possible.

thanks,
daffo
 

You can use the following order of Astro commands
Before placement:

axgScanTrace (to identify scan chain in the design)

aprDumpScanChain (to keep this infor for future inspection)

axgScanChainOptim
setFormField "Scan Chain Optimization" "Mode" "Delete only" (to delete the chain connectivity)

astAutoPlace (usual placement command or any other you want)

axgScanChainOptim
setFormField "Scan Chain Optimization" "Mode" "Optimize" (to connect scan flop in scan chain, according to real flop placement)
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top