Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What is the body effect ?

Status
Not open for further replies.
Re: body effect

vt depends on the body bias. change of vt by body bias is the body effect. normally we connect n-mos body to gnd and p-mos body to supply making vsb zero. if you have many nmos devices in series as in nand gate, the body of the device which is close to gnd is at 0V and other devices' body bias will 0v(gnd)+delta v
 
  • Like
Reactions: migmig

    M

    migmig

    Points: 2
    Helpful Answer Positive Rating
body effect

How can u tie p-mos body to supply making vsb zero..........

U will tie source to Vdd and Drain to Substrate right?? bcz PMOS is operated in Common source mode ....
so how Vsb becomes 0 for pmos can u explain me thiis plz?????????

In ur view body means substrate right?? Vsb is source to substrate voltage right?
can u explain me
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top